SC1680 Hammermill Shredder

The SC1680 means: the hammermill shredder rotor diameter is 800mm, the rotor length is 1600mm. This machine’s power is 160-200kw. capacity for scrap metal is 3-4TPH.

If you are going to match a double shaft shredder, then that’s the best choice as well, the result for adding a double shaft shredder, it’s can increase capacity around 1.3-15.times

Application for feeding hammermill shredder:

-Scrap Car Shell

-Aluminum Profiles

-Scrap Bicycle/Bike

-Cast Aluminum

-Metal Drums

SC1680 Hammer Mill Shredder
Capacity 3000-4000kg/h
Discharging screen size 50mm-80mm(customized)
Output material density 0.8-1.3T/CBM
Motor connection way V-Belt Connect
Machine weight 12000kg
Feeding port size 1600*800mm
Hammer quantity 1 12pcs*21kg/hammer
Flower Hammer quantity 2 12pcs*21kg/hammer
Machine Dimension 3.4×2.5×3.8m
Hammer Mill Shredder

Releted Products

Hammermill Shredder is also called metal crusher or scrap steel crusher in a different places. It’s a high-speed rotating spindle with a hammer, to hammer the feeding metal materials, It can be a single machine or Hammermill Shredder production line equipment. It is widely used in the processing of scrap metal crushing and recycling, can reduce the efficiency of metal material recycling.

Features of SC1680 hammer shredder:

1 hammer shredder body adopts the reinforced structure of an extra-thick steel plate with inclined support to ensure that the equipment meets the overload operation.

2 The liner plate and hammers are processed by heat treatment, natural stress relief, more stable chemical composition, and the service life is increased by more than 30%.

3 Pre-compression of material by pressing device, expanding the feeding range to improve production efficiency.

4 The safety door is set, after the unbreakable material enters the crushing chamber, the operator can open the safety door and discharge it from the machine to avoid damaging the crusher.

5 The hydraulic cover opening device, which saves time and labor for replacement and maintenance.

6 PLC control system and hydraulic power system, intelligent production saves time and effort, and the operation of the equipment is clear at a glance.

We always suggest our users to take the full hammer shredder production line as below
feeding conveyor, hammer shredder, discharging conveyor, magnetic separation conveyor, moveable conveyor, dust removal system and operating cabinet

Hammer Mill Shredder

The working processing will be :

The crushed materials coming out from the hammer shredder will go through the belt conveyor and magnetic separation system, to separate the ferrous metal particles from the non-ferrous and non-metallic materials.

Then the residue non-ferrous plus litter ferrous metal will go to another separating system to take out the iron again. After this processing, the recovery efficiency can be improved.

The working processing drawing as below:

Hammer Shredder Line

We Using All China Brand Parts For Normal Inquiry Of Vertical Shredder ,But We Also Can Do All The Parts As You Need.

You Can Take The Following Sheet For Reference Once You Have Details Requirements.

Scrap Metal Recycling Machine Certificate

√ Reliable Quality √ Lower Power Consumption
√ Low Noise √ Higher Output Capacity
√ Siemen/Abb/Weg Motor √ Skf Bearing
√ Schneider Component √ Siemens Plc
√  Guomao Or Tongli (China Top Brand) All Other Customized Parts


Send Your Inquiry