SCL750 Hammer Shredder
SCL750 is a 15-20tph capacity hammer mill shredder.
The SCL750 hammer shredder is an excellent choice for the large metal recycling yard, it can shred large scrap materials directly.
If you are going to match a double shaft shredder, then that’s the best choice as well, the result for adding a double shaft shredder, it’s can increase capacity around 1.3-15.times
- Customer Site
- Parameters
- Goods Delivery
| SCL750 Metal Hammermill Shredder | |
| Power | 750kw/1000hp |
| Capacity | 20Tph(10Cm Output) |
| Hammer Ratation Dia | 1.5m |
| Feeding Port Size | 1.6m |
| Rotor Speed | 750rpm |
| Surface Wall Thickness | 60mm |
| Inside Plate Thickness | 60mm |
| Hammer Quantity | 24pcs |
| Per Hammer Weight | 41kg |
Application for SCL750 Metal Hammermill Shredder
- Waste car (remove engine, gearbox, rear)
- Sorted domestic light scrap (except non-shredding materials)
- Household appliance
- Bicycle, track’s guard railing and other similar daily metal waste
- Baled metal scraps (density not thick than 0.65ton/m3)
- Steel plate, sheets and profiles (thickness not beyond 8mm)
The working processing will be :
The crushed materials coming out from the hammer shredder will go through the belt conveyor and magnetic separation system, to separate the ferrous metal particles from the non-ferrous and non-metallic materials.
Then the residue non-ferrous plus litter ferrous metal will go to another separating system to take out the iron again. After this processing, the recovery efficiency can be improved.
The working processing drawing as below:
We Using All China Brand Parts For Normal Inquiry Of SCL750 Metal Hammermill Shredder ,But We Also Can Do All The Parts As You Need.
You Can Take The Following Sheet For Reference Once You Have Details Requirements.
| √ Reliable Quality | √ Lower Power Consumption |
| √ Low Noise | √ Higher Output Capacity |
| √ Siemen/Abb/Weg Motor | √ Skf Bearing |
| √ Schneider Component | √ Siemens Plc |
| √ Guomao Or Tongli (China Top Brand) | All Other Customized Parts |